Dentsply Sirona CEREC SpeedFire

Dentsply Sirona CEREC SpeedFire

The CEREC SpeedFire is the smallest and fastest chairside dental sintering and glazing furnace on the market, capable of sintering a full-contour zirconia crown in approximately 10 to 14 minutes.

The Dentsply Sirona CEREC SpeedFire is a compact chairside furnace featuring rapid heating rates up to 300 °C/min via induction technology. It handles sintering, crystallization, and glazing for materials like zirconia and lithium disilicate in a single visit.

Benefits
> Single-Visit Dentistry: Sinter, glaze, and crystallize restorations in minutes so patients can receive permanent crowns in one appointment.
> Automatic Workflow: CEREC or inLab CAM software transmits all firing and temperature parameters directly to the furnace with zero manual programming required.
> Induction Technology: Uses an alternating magnetic field for rapid, uniform heating and homogeneous temperature distribution without traditional long pre-heating cycles.
> Material Versatility: Processes Dentsply Sirona blocks as well as validated materials from partners like Ivoclar, VITA Zahnfabrik, 3M, Kuraray Noritake, GC, and Shofu.
> SuperSpeed Chamber: Accommodates up to three single crowns or a 3-unit bridge (up to 31 mm in length).
> Intuitive Interface: Features an easy-to-use touch display and multi-colored LED status indicators. 

Technical Specifications
Dimensions (W x H x D): 250 x 425 x 425 mm (9.8 x 16.7 x 16.7 inches)
Furnace Chamber (Ø x H): Diameter 38 mm x Height 20 mm
Weight: 21 kg (46.3 lbs) unpacked
Maximum Sintering Temperature: 1600°C (2912°F)
Rated Line Voltage: AC 100V – 240V
Power Frequency: 50/60 Hz
Maximum Power Consumption: 1200 W
Protection Class: Protection Class I device

Performance & Operation
Sintering Time: 10 to 15 minutes for a full-contour zirconia crown (e.g., CEREC Zirconia+ in ~14:48 min)
Firing/Glazing Time: ~4:30 minutes for materials like CEREC Tessera via pre-heating functions
Max Temperature: Reaches up to 1,600 °C
Heating Technology: Induction technology for homogeneous temperature distribution without preheating or holding stages
Software Integration: Receives automated, validated job parameters directly from CEREC CAD/CAM software

Supported Materials
Zirconia: CEREC MTL Zirconia, CEREC Zirconia+, CEREC Zirconia meso, inCoris TZI / TZI C.
Glass/Lithium Ceramics: CEREC Tessera, IPS e.max CAD (crystallization/glazing), Celtra Duo.